Routing large hoses reliably by UNIFLEX Advanced 1665 from KABELSCHLEPP

In addition to more efficient cable separation and reliable strain relief even in harsh surroundings, the development engineers at KABELSCHLEPP have also addressed the subject of "Safe and reliable routing of large hoses". And for good reason. Often, large-diameter hoses must be routed safely and reliably in parallel with cables, e.g. exhaust hoses in the wood processing industry.


The new mounting frame stays for the UNIFLEX Advanced 1665 from KABELSCHLEPP handle this task even when hoses have a diameter larger than the clear height of the chain links. Depending on the installation situation, the mounting frame stays can be attached to the inner radius or outer radius of the cable carrier. To route additional small-diameter lines such as electrical cables and hydraulic hoses, the chambers below the main chamber are used. For additional separation of these lines, dividers can also be employed here.


The new mounting frame stays from KABELSCHLEPP are available with various inside heights of 114 mm, 139 mm, 164 mm and 189 mm, so that appropriate hose routing solutions are available for any hose diameter.